Cut Off Wheels, Fiber Disks HT, 2" Dia. - Multi Pack of 12 #11-32208/12

Cut Off Wheels, Fiber Disks HT, 2" Dia. - Multi Pack of 12 #11-32208/12 Review

See more picture

Cut Off Wheels, Fiber Disks HT, 2" Dia. - Multi Pack of 12 #11-32208/12 Feature

• 2" Diameter. Use with Mandrel # 80-18100
• 1/32" Thickness
• 1/8" Center Hole
• Maximum Speed:  30,000 RPM
• Package Includes - 12 Fiber Disks

The Gyros Fiber Disks HT are abrasive type Cut Off Wheels specifically formulated to cleanly and smoothly cut High Tensile-Strength materials such as hardened and unhardened steels, steel alloys, hard bronze, etc. Sharp cutting action produces a clean, smooth finish. The fiberglass-reinforced structure gives our cut off wheels unsurpassed strength and flexibility making them long lasting and resistant to breakage. Designed specifically for use in all motorized rotating hand tools, our ultra sharp abrasive wheels optimize the low torque supplied by those tools found in just about every tool box. These abrasive grinding wheels will stand up to prolonged use with minimum sparking, no premature wear, and without overheating parts being cut. For your safety and protection, NEVER operate a rotary tool without the GyrosGuard Safety Shield when using cutting accessories.

Check price now

Rerate Products

Customer Review

Jul 01, 2011 10:30:06

Medicool Small Fine Carbide Cone 3/32" Bit #SC20

Medicool Small Fine Carbide Cone 3/32" Bit #SC20 Review

See more picture

Medicool Small Fine Carbide Cone 3/32" Bit #SC20 Feature

• For use with Medicool's ProTouch 1000, Pro Power, Nail Pro,
• TurboFile, FileMaster, EF-1, NailGlide and Pedinova
• Also: KUPA, ASEPTICO, BRAVO, BUFFALO, NAIL LABO, LASCO, DREMEL, ERICA's All bits have a 3/32" shaft
• Used for qickly filing around the cuticle area and the side walls
• Use on acrylic, silk, fiberglass and gel

Medicool Small Fine Carbide Cone 3/32" Bit Item No. SC20 Professional Features: ?For use with Medicool's ProTouch 1000, Pro Power, Nail Pro, TurboFile, FileMaster, EF-1, NailGlide and Pedinova ?Also: KUPA, ASEPTICO, BRAVO, BUFFALO, NAIL LABO, LASCO, DREMEL, ERICA's All bits have a 3/32" shaft ?Used for qickly filing around the cuticle area and the side walls ?Use on acrylic, silk, fiberglass and gel

Check price now

Rerate Products

• Medicool Small Bullet Carbide Bullet 3/32" Bit #SC53

Customer Review

Jun 30, 2011 06:20:58

Dremel EZ402 EZ Lock Mandrel

Dremel EZ402 EZ Lock Mandrel Review

See more picture

Dremel EZ402 EZ Lock Mandrel Feature

• The Dremel EZ Lock makes accessory changes easy as pull - twist - release
• One-piece mandrel design eliminates the need for screw
• Compatible with all Dremel rotary tools
• First patented system of its kind
• Use with EZ Lock Cut-off Wheels

The Dremel EZ Lock Mandrel for Rotary Tools makes changing mandrel-mounted accessories as easy as a pull, twist, and release. This patented one-piece mandrel design means there's no worry of losing a screw or needing a wrench. Compatible with all Dremel rotary tools, the EZ lock mandrel is ideal for use with cut-off wheels and abrasive buffs.

Accessory changes are as easy as 1-2-3

Time saving

EZ Lock Cut-off Wheels last 2 times longer

Use with EZ Lock Cut-off Wheel

1 Piece Mandrel Design Simplifies Changing Accessories

Pull, Twist, Release, Compatible With All Dremel Rotary Tools.

Check price now

Rerate Products

• Dremel 511E EZ Lock Coarse Grit and Medium Grit Finishing Abrasive Buffs, 2-Pack
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack
• Dremel EZ544 1-1/2-Inch EZ Lock Wood Cutting Wheel
• Dremel EZ545 1-1/2-Inch EZ Lock Diamond Wheel
• Dremel 4486 MultiPro Keyless Chuck

Customer Review

Jun 29, 2011 03:34:10

Dremel 300-N/10 300 Series 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 10 Accessories

Dremel 300-N/10 300 Series 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 10 Accessories Review

See more picture

Dremel 300-N/10 300 Series 1.15 Amp 5,000 to 35,000 RPM Variable Speed Rotary Tool with 10 Accessories Feature

• New, dynamic design for additional comfort and control
• Variable speed from 5,000 to 35,000 rpm
• Lightweight design for comfort during prolonged use. Comfort grip housing for easier handling and better tool control.
• Dove-tail feature for Dremel-exclusive attachments
• Click-and-set on/off switch allows precise speed selection

"ROTARY TOOLThe Dremel 300 series rotary tool offers the precision and control required to complete a wide range of projects from fine art to home repair. ACCESSORIES: 300 series variable speed rotary tool, 150 drill bit, 401 mandrel, 402 mandrel, 407 coar"

Check price now

Rerate Products

• Dremel 4486 MultiPro Keyless Chuck
• Dremel 225-01 Flex Shaft Attachment
• Dremel 220-01 Rotary Tool Work Station
• Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
• Dremel 231 Shaper/Router Table

Customer Review

Jun 28, 2011 03:07:34

Trademark Tools 75-TJ6410 Hawk Engraving Set, High Speed Steel, 10-pc.

Trademark Tools 75-TJ6410 Hawk Engraving Set, High Speed Steel, 10-pc. Review

See more picture

Trademark Tools 75-TJ6410 Hawk Engraving Set, High Speed Steel, 10-pc. Feature

• High Speed Steel
• Wooden case with spaces for each bit measures 30.625 x 30.75 x 10.625-Inch
• 1/8-Inch shank
• Each bit measures approximately 0.25 x 0.25 x 10.375

This quality Engraving Set is designed for precision engraving and features a 1/8" (2.4mm) shank. They are ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

Features include:

• High Speed Steel
• Wooden case with spaces for each bit measures 3.625 x 3.75 x 1.625 inches
• 1/8 inch shank
• Each bit measures approximately .25 x .25 x 1.375

Check price now

Rerate Products

Customer Review

Jun 26, 2011 09:59:45

Brass Wire Wheel - 1 5/8" L - 1/8" Shaft - 1/4" x 1"

Brass Wire Wheel - 1 5/8" L - 1/8" Shaft - 1/4" x 1" Review

See more picture

Brass Wire Wheel - 1 5/8" L - 1/8" Shaft - 1/4" x 1" Feature

• 1/4" Crimped Brass Ultra-Fine Wire
• 1" Wheel Diameter
• Wires Securely Fastened Utilized Steel Clamping System
• 1-5/8" Long
• 3/32" Shaft Fits most Dremel and Rotary Tools

The 1/4" long crimped brass wires are firmly attached by the steel clamp casing. The wheel shape provides excellent horizontal polishing power. The extra-fine wire is great for creating an Ultra-Smooth surfaces on wood, metal or ceramics. Perfect for removing paint and rust! The 1/8" shaft should fit perfectly on most dremel/rotary tools.

NOTE: This is a discontinued item. We will no longer be carrying it and are looking to liquidate our remaining stock! Brand new! All sales are final!

Check price now

Rerate Products

Customer Review

Jun 25, 2011 04:47:34

161 - Pc. Trademark® Rotary Tool Set

161 - Pc. Trademark® Rotary Tool Set Review

See more picture

161 - Pc. Trademark® Rotary Tool Set Feature

• Item # : TG-75-9910-161
• Dimensions: 2" L x 14.5" W x 14.25" H
• Free Shipping within the lower 48 contiguous (USA states)

161 - Pc. Trademark Rotary Tool Set cuts, grinds, sands, drills, sharpens, and polishes with over 40 different accessories! Quick change collets firmly secure accessories, while compact size allows comfortable use and control even in tight spaces. Featuring a rotary tool with a powerful variable speed motor, a full assortment of bits and accessories plus a hard-sided carry case to keep it all together... it's a huge handyman value! More: 161 pieces in all... including a full assortment of drill bits, wire and nylon brushes, grinding stones, buffer pads, sanding disks and wheels, burr heads and more! 1/8 die grinder; 110V, 60Hz, 130W; 8,000-30,000 RPM; Grinder is 9 long and case is 2 x 14 1/2 x 14 1/4.; Everything you need... organized, handy and mobile! Order Today! 161-Pc. Trademark Rotary Tool Set

Check price now

Rerate Products

Customer Review

Jun 24, 2011 03:30:55

Jeweler's HSS 16-Piece Micro Bit Set - 1.0 to 2.0mm

Jeweler's HSS 16-Piece Micro Bit Set - 1.0 to 2.0mm Review

See more picture

Jeweler's HSS 16-Piece Micro Bit Set - 1.0 to 2.0mm Feature

• Super-fine drill bits used by professional jewelers and hobbyists
• 16 bits; 1mm, 1.05mm, 1.1mm, 1.15mm, 1.2mm, 1.25mm, 1.3mm, 1.35mm, 1.4mm, 1.45mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2mm
• commonly used in jewelry making, micro-electronics
• High-speed steel precision-machined for close-tolerance applications
• Bits range in length from 1-3/8" for larger sizes to 7/8"; vinyl storage pouch

High Speed, ultra precise bits designed especially for soft metals. This makes these bits perfect for jewel makers and electronic technicians who work with soft metals and require a high degree of precision.

Check price now

Rerate Products

• NEW 15 pc Tap & Die Set Screw Plate Jewelers Watchmaker
• Dremel 4486 MultiPro Keyless Chuck
• Dremel 220-01 Rotary Tool Work Station

Customer Review

Jun 22, 2011 23:08:03

Dremel DRM00481E 481 3/32" Dremel Collet

Dremel DRM00481E 481 3/32" Dremel Collet Review

See more picture

Dremel DRM00481E 481 3/32" Dremel Collet Feature

• Package Quantity: (1) Piece
• Type: 3/32In. Collet
• For Use With: Dremel - 235; 237 & 332

Die Accessories - Grinders Type: 3/32 In. Collet For Use With: Dremel® - 235; 237 & 332

Check price now

Rerate Products

• Dremel DRM00482B 482 1/16" Dremel Collet
• Dremel DRM00483L 483 1/32" Dremel Collet
• Dremel 4486 MultiPro Keyless Chuck
• Dremel 225-01 Flex Shaft Attachment
• Dremel #7134 5/64" Diamond Wheel Point

Customer Review

Jun 21, 2011 21:20:50